wow

good job xin

but there is an problem when i start it and nothing happen, i already have latest java, and i do all the steps, but negative >.>

gonna wait for your update soon

arviejhay wrote: 6d1g4a

I have a problem:
when i set the bars number to 80, then i press start after i fill out the needed values, the spectrum didn't showed up.

Yeah, my bad. 60 was the max number of bars but now I've changed it to 120
I've just fixed it, here's a new link: http://puu.sh/m7fpG/9a08beaa42.rar

What should I have to do to place my spectrum at perfect centre?

Reana wrote: o5kl

What should I have to do to place my spectrum at perfect centre?

What do you mean by centre?. X or Y?

Y:240
X: It will depend of bars quantity

Cool stuff! Let's see how are people going to use this
Also thanks for linking my thread, did the same as I really see this can do a lot of things.

Wafu wrote: d5i1

Cool stuff! Let's see how are people going to use this
Also thanks for linking my thread, did the same as I really see this can do a lot of things.

Thanks for linking my thread too
Yep, I just hope it doesn't will be overused in beatmaps :p

Finally

whats going on

http://puu.sh/miUWb/cf54398bbb.png

Change the locale to Locale.US, please. Using the program under a locale that has, for decimal values "0,1564" breaks everything.

Yeah, my bad. I'm gonna fix it soon and a new version
Done, Here's a new link. I've edited the link in the main post too.

after i apply the spectrum, osu becomes super laggy when i open my map in the editor. it doesn't lag on any other map with an audio spectrum.

byfar wrote: 5w4c46

my map in the editor becomes super laggy when i apply the spectrum, it doesn't lag on any other map

Can you provide me your beatmap?

XinCrin wrote: 5t433o

byfar wrote: 5w4c46

my map in the editor becomes super laggy when i apply the spectrum, it doesn't lag on any other map

Can you provide me your beatmap?

https://osu-ppy-sh.jeuxcrack.net/s/340048

That's because you've used too many bars, just check at the .osb and the amount of lines and how osu have to load these lines.
In addition, you've used the spectrum in the entire song, 16 mb. of sb code

i used your particle generator as well, is there anyway to quickly delete half of the code? since there are so many lines :/

now the issue i have is that, when i decide to section off the spectrum by starting it off in the middle section of the song , the audio spectrum still starts out small (like how it would if i generated a spectrum near the beginning.) what i'm saying is that the spectrum doesnt match the intensity of the song if i decide to set a StartTime

startTime and endTime are only to set the fade-in and fade-out of the spectrum. You'll need to extract a specific part of the .mp3 and open it to extract the code if you want. The program will not cut the mp3 for you

XinCrin wrote: 5t433o

startTime and endTime are only to set the fade-in and fade-out of the spectrum. You'll need to extract a specific part of the .mp3 and open it to extract the code if you want. The program will not cut the mp3 for you

And that's not the idea (at least imho). The point is do the whole actions by the startTime and endTime, not just the fade-in and fade-out. Making the vector scale since the startTime till the end is something unfavorable for the people which just want the spectrum effect for one section, because the aplication will generate more unnecesary code, and more unnecesary code = more unnecesary size for the .osb
Apparting that, the tool is really awesome, and will be great add the style of some geometric forms (like the circle, or triangle, o square)

Because of that we have the stop button to avoid the unnecessary code
And It looks like you still didn't use the app. startTime applies for the scale vector too, movement and others too. . .

awesome!

Thank you for making this <3

What's new in 0.2 version? 5ns2k

1. First, We have to re- the program, I've edited the main post with the new link or click here
2. An installer, it will create a shortcut to your desktop. So you can easily open the program
3. Auto-Updater, It will check if there are a new version and it will update it for you. Thanks to Kagu-chan for his help
4. Your storyboard code should be automatically saved to your desktop.
5. In the next update I'll add more styles and improve the GUI. That's all for now!

Nice~ <3
I'm already have 2 request :3

Thank you XinCrin for making this program, it's perfect~

Cool :3

Mao wrote: 2t6n4x

Cool :3

im dead.
it get stuck like this for over 4 hours
and i've already tried many ways to solve that but still
dead.

Nerova Riuz GX wrote: 38161u

im dead.
it get stuck like this for over 4 hours
and i've already tried many ways to solve that but still
dead.

Can you finish the process at windows task manager and open it again?

Currently im working with the updater - I will serve a fixed version soon.
Can you please send me the content of

%appdata%/Spectrum/kcConfig.json per PM?
Otherwise XinCrin can send it too.

Please also tell me your operating system and (per PM) your IP adress if possible - on the server i see a few requests just retriving project information, but not more then that...

For all having the Starter Issues:

Please send me the data described the post above.
You always just can start %appdatta%Spectrum/App.exe which contains the real application if you alredy ed it!

To kick the process out of windows you have to look for "Osu beatmap Grabber" in your taskmanager - this will get fixed too.

XinCrin wrote: 5t433o

Nerova Riuz GX wrote: 38161u

im dead.
it get stuck like this for over 4 hours
and i've already tried many ways to solve that but still
dead.

Can you finish the process at windows task manager and open it again?

yes i tried that. i reopen it at around 00:10 and it's still like that (01:47 now)
and i've tried using compatibility mode with windows XP, running it under the 's ....blahblahblah

Kagu-chan wrote: 6j3g2r

Currently im working with the updater - I will serve a fixed version soon.
Can you please send me the content of

%appdata%/Spectrum/kcConfig.json per PM?
Otherwise XinCrin can send it too.

Please also tell me your operating system and (per PM) your IP adress if possible - on the server i see a few requests just retriving project information, but not more then that...

.json file is here: http://puu.sh/mD1hX/e09ae885c5.json
operating system is windows 7 64 bit
ip is 58.115.186.117 (im not sure what im using is floating ip address or not)

I've added a new link at main post with the program without the auto-updater function in case someone can't make it work

The stop comes from a timeout as it seems - it was just to small values.
I adjusted it, but tthe build for this Tool is a bit baka...

Fix follow asap, but i have to look what the heck is running wrong...

How do I adjust the size of the wave

I don't know, I want to install the app but the installer doesn't open :'(

Please use the direct link at the Ende oft the Main thread. The installer dies not works correctly currently and i cant say why -.-

What's new in 0.3 version? 6g5254

1. First, We have to re- the program, I've edited the main post with the new link or click here
2. I've removed the auto-update provided by Kagu-chan, we had some issues and we should fix them before to include them to avoid problems
3. A new Style, circular spectrum
4. Color Loop, to create colorful spectrums
5. Auto-Saving Values, you'll not lose your values when it closes by itself. They will be restored when you open again the program (Settings.sp at the current folder)
6. You don't need to cut the mp3 file anymore to get an specific part, it will start and end when it reaches the endTime value (Yeah you don't need to press the STOP button anymore)
7. And. . When you press START wait a bit, don't press it again. Why?. Because it takes a while to skip to the startTime ms
8. Main post has been edited with more info too . . .

yay a circular spectrum

welp, a question
is it possible to make those bars' length more "balanced"?
in some songs, some of the bars go extremely long but some of them can't even be recognized

Bars lenght? Ms lenght or what?
If you are talking about the size, not.
It will depend of song's beats

How do i make it BottomCentre where it fits like yours?
This is how mine looks like D:

-Tochi wrote: z4t55

How do i make it BottomCentre where it fits like yours?
This is how mine looks like D:

After installing the tool, you can use (Windows Key+R), type in %appdata%\Spectrum and press enter. You'll see bars.txt file here, open it and type in how many bars you want. Maybe it works even in the bars file which you get when extracting the tool, but I'm not sure. That's the only difference I could think of. Maybe it's what you want. Just edit the bars.txt in folder with the tool.

Installer has been removed in the las update, wafu you are wrong

XinCrin wrote: 5t433o

wafu you are wrong

Partially. The wrong thing was that it's not in appdata anymore, so he only needs to adjust bars.txt in the folder he extracted it.

Can anyone be more thoughtful than you?
I love all of your SB Tools

This is really helpful for new mappers! Thanks for creating this!

But there's one problem for me though. When I add the codes in my osb. file, the spectrum won't be visible. It's just invisible through the whole song. Did I mess up anything? Or I'm just a noob...(Sorry but I'm new to this spectrum thingy and I want to try and make it)


If I did something wrong, can you reply? Thanks!

Did you add the bar image to your beatmap folder?

XinCrin wrote: 5t433o

Did you add the bar image to your beatmap folder?

I just had the same problem, the spectrum isn't visible. I have the bar.png in the folder but it doesn't wants to appear :/
nb: I'm not using the new version of spectrum because of antivirus thingy-stuff.

Zerss wrote: 684l5l

XinCrin wrote: 5t433o

Did you add the bar image to your beatmap folder?

I just had the same problem, the spectrum isn't visible. I have the bar.png in the folder but it doesn't wants to appear :/
nb: I'm not using the new version of spectrum because of antivirus thingy-stuff.

Link me your beatmap with the applied spectrum code

XinCrin wrote: 5t433o

Link me your beatmap with the applied spectrum code

here's the sb
I manage to correct the spectrum by changing opacities properties on the .osb, they were all at 0, so, there's no problem anymore.

I'd love to try it, but "Smart-As-A-Rock"Screen Filter keeps me from ing it. I disabled SmartScreen Filter and it STILL was blocking the dl. Can anyone help? I told someone I'd make them a spectrum and I'm sure as shit not going to recreate one from scratch XD
EDIT: Maybe make a Mediafire DL? My laptop has no problem with those...

Neglection wrote: 34613p

I'd love to try it, but "Smart-As-A-Rock"Screen Filter keeps me from ing it. I disabled SmartScreen Filter and it STILL was blocking the dl. Can anyone help? I told someone I'd make them a spectrum and I'm sure as shit not going to recreate one from scratch XD
EDIT: Maybe make a Mediafire DL? My laptop has no problem with those...

Yeah same. Keeps blocking the .

Carrot113 wrote: 1iw2m

This is really helpful for new mappers! Thanks for creating this!

But there's one problem for me though. When I add the codes in my osb. file, the spectrum won't be visible. It's just invisible through the whole song. Did I mess up anything? Or I'm just a noob...(Sorry but I'm new to this spectrum thingy and I want to try and make it)


If I did something wrong, can you reply? Thanks!

having the same problem



that's pretty much what i have. Im not sure if i did it right, please help me.

using latest version

It seems it no longer works with the latest version of Java, looks like i am unable to use it now

Ye, it not works with Java 8 Update 111
now I can't put spectrum in my sbs ;;

please make version for linux and mac

where does the code go

Pickkle wrote: 1a1e73

where does the code go

wherever you set the destination to go,
i.e; copy the address from a folder or somewhere and paste into the save as box

Excuse me, i have one question:

What is the X-value to make it at the center, considering I'm using 90 bars?




Thanks btw

Very useful!

Can't open it

nothing happen after open mp3 fle. im using win 10

Thx a lot!!!!!

Hello XinCrin, but can you please fix this glitch?
When I add the code to my main osb. file, the bars wasn't appearing. But I try to add a bar.png on the editor, copy all of your other codes, and it works well. After some comparison, the reason for this error is the file's name. It was meant to be bar.txt but the code use old editor code, so it's SB/bar.txt and it makes the bars can't work. So, can you please fix this glitch for me and others? Thank you for your !

version with no java needed???

Lottery61 wrote: 2s615l

Hello XinCrin, but can you please fix this glitch?
When I add the code to my main osb. file, the bars wasn't appearing. But I try to add a bar.png on the editor, copy all of your other codes, and it works well. After some comparison, the reason for this error is the file's name. It was meant to be bar.txt but the code use old editor code, so it's SB/bar.txt and it makes the bars can't work. So, can you please fix this glitch for me and others? Thank you for your !

You could just create a folder named SB and place the file there.

Sorry I don't have the source code anymore, this project is reaaaaaaaaally old

Oh ok

this is amazing *_* thank you